BLINK BACKLIGHT LED BAR VOLT & AMPER TESTER 230V

• Μάρκα : BLINK
• Μοντέλο: WK-58
• BACKLIGHT LED BAR TESTER WITH AMPERE METER & BUZZER
• Τάση Λειτουργίας : 85 - 260V AC
• Τάση Εξόδου : 0 ~ 260 V DC (Ρυθμιζόμενη)
• Ισχύς  εξόδου  : DC 0 ~ 25 mA
• Ρυθμιζόμενη τάση εξόδου ρεύματος
• Ρυθμιζόμενη φωτεινότητα LED
• Υψηλή ακρίβεια σε δύο αναγνώσεις
• Αυτόματη προσαρμογή στην τάση των λαμπτήρων LED
• Δεν χρειάζεται Ρύθμιση
• Ελεγχος για διαρροή στον λαμπτήρα LED 
• Διπλή απομονωμένη ασφαλής προστασία
• Η προστασία κυκλώματος
• Υψηλή Απόδοση
• Αποτελεσματικό
• Εύκολη Χρήση
• Μπορείτε να μετρήσετε μέχρι 80 λάμπες LED Ταυτόχρονα ( Περίπου 10 LED BAR ) 
• Δέν υπάρχει κύνδινος ηλεκτροπληξίας
• Μην Κρατάτε τους Ακροδέκτες + - για μεγάλο Χρονικό Διάστημα
• Είναι Ασφαλές για σύντομα Χρονικό διάστημα
• Μην Ξεχάσετε να αποσυνδέσετε παροχή ρεύματος της Τηλεόρασης και παροχή  LEDBAR. Μπορεί να προκαλέσει ζημιά INVERTER της τηλεόρασης.
• Διαστάσεις : 140x80x40 mm
• Βάρος       : 87g

Translated by Google Translate

Multi-functional adjustable LED controller

Product characteristics

This product has 9 different features.
1. Adjustable voltage and current output.
2. Adjustable led brightness.
3. Detection of electrical leakage in the LED lamp.
4. High accuracy in two reading data.
5. Automatic adjustment to LED voltage.
6. LED lamp quality indicator with buzzer.
7. Safe electrical insulation. (Note: Tips should never be touched.)
8. Circuit protection protects the LEDs from burning out.
9. Different types of lamps, lamp panels, lamp panels and TV backlight can be connected in about 80 strings.

Use.
1. Test lamp:
Use the test pen to connect the positive and negative output terminals and touch the ends of the led to light up the led. At the same time, voltage and current data are displayed. Turn the "voltage adjustment" knob to adjust the output voltage.
The output current can be adjusted with the output current switch. The output current varies with different leds.
2. Voice command:
1. If the device gives a Bi~ sound during the test, this indicates that the led is normal. Increases productivity by working without the need for visual tests.
2. If there is no sound from the device, it means that the led has a problem.
3. Alarm sound indicates electricity leakage. You can find the leak by checking using the tester.
3. Leak detection function:
If you want to check the leakage in the LED, you should use the leak detection clip.
Place the metal on the lamp plate. If there is a short sound, the product has a normal continuous alarm sound, there is a leak in the product.
4. Change the output mode:
Set the current level to the maximum and the voltage to the maximum, connect the short positive and negative output pin for 5 seconds, the device can complete the ammeter display, "HI" or "Lo", output mode switch.
"HI" mode (factory default): when the device detects the LED, it will automatically send the maximum current to the current blocking position.
It is suitable for testing high power led lamps.
"b" mode: Adjust the knob to adjust the output voltage and output current at the same time. The led lamp can be adjusted to the appropriate light for long-term work without harming the eyes.
Output voltage range: O~ 230V
(automatic protection is activated when the voltage is too high)
Current range: 0~25mA